DSpace DSpace 日本語
 

AIT Associated Repository of Academic Resources >
A.研究報告 >
A1 愛知工業大学研究報告 >
3.愛知工業大学研究報告 .B(1976-2007) >
23号 >

Please use this identifier to cite or link to this item: http://hdl.handle.net/11133/775

Title: Y-Ba-Cu-O系セラミックス超伝導体の作製
Other Titles: Y-Ba-Cu-Oケイ セラミックス チョウデンドウタイ ノ サクセイ
Fabrication of the High Temperature Superconductor Y-Ba-Cu-O System
Authors: 澤木, 直人
内田, 悦行
赤尾, 保男
SAWAKI, Naoto
UCHIDA, Yoshiyuki
AKAO, Yasuo
Issue Date: 31-Mar-1988
Publisher: 愛知工業大学
Abstract: The zero resistance and the complete Meissner effect of the Y-Ba-Cu-O ceramics superconductor have been observed. The zero resistance critical temperature about 90 K has been measured by the conventional four-probe technique. The specimen of the superconductor has been fabricated as follows. Powder materials of Y_2O_3,BaCO_3 and CuO are mixed and calcined at 950℃ for 5 hours in air. The powder is grinded and pressed into a pellet by 1.5t/cm^2. The pellet is sintered at 950℃ for 5 hours in air and after that it is furnace-cooled to room temperature or annealed in oxygen atmosphere. The sample size is 10 mm diameter and 1mm thickness after the sintering. The structure has been analysed with thermogravimetric analyser, X-ray diffraction and scanning electron microscope. The crystal structure has been confirmed to be essentially of a layered orthorhombic perovskite type.
URI: http://hdl.handle.net/11133/775
Appears in Collections:23号

Files in This Item:

File Description SizeFormat
紀要23号B(P17-21).pdf1.33 MBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

 

Valid XHTML 1.0! DSpace Software Copyright © 2002-2010  Duraspace - Feedback